Skip to content
Clarksdale Locksmith SpecialistsRequest a visit
Open 24/7(289) 816-4986Call now
Two black-headed keys clamped in a bench machine, one beneath a vertical cutter, with metal shavings around the clamps. — Spare Car Key Duplication, Burlington

Car keys · Burlington

Spare Car Key Duplication in Burlington

The paperwork for the used car changed hands last week, and the previous owner mentioned, almost as an afterthought, that a second key never turned up. One worn blade on a single ring is now the entire access system for the vehicle.

Call now · open 24/7(289) 816-4986

Request a visit

In plain words

When a key's blade has thinned or its buttons have gone soft with age, waiting for it to fail outright is the harder plan to manage. A spare made from the original while it still works produces a fresh blade and, where the car carries a chip or remote, a fresh electronic match, so the household stops depending on the most tired copy in the house. The new key is tested apart from the old one in every lock and the starting system, and the worn original can then be retired or kept as a genuine backup rather than the only option.

Sound familiar?

The blade on the everyday key has gone shiny and thin along one edge, and lately it needs a wiggle before the ignition catches. Nobody wants to be holding a failing original with nothing waiting in reserve if it finally gives out.

How the visit goes

Spare Car Key Duplication · Burlington

How the visit goes

Technician with a yellow cordless drill and thin screwdriver bit fastening a brass-colored lock plate on a dark paneled front door. — Burlington
  1. 1

    Deciding between copying and programming the chip

    Some immobilizer systems allow a new chip to be cloned directly from the working key's own data, which lets a matching second key be produced from the original. Other systems, including some that use rolling codes or added cryptography, call instead for connecting to the vehicle through its diagnostic port and enrolling a freshly coded chip as an additional authorized key rather than a copy of the first. The locksmith identifies which method the specific vehicle and transponder support before starting the work, since the two routes use different tools and take different amounts of time at the vehicle.

  2. 2

    Working from a used or single-key vehicle

    When only one key exists for the vehicle, the whole process leans on that single copy: its blade is traced or measured, its chip is read where the system permits it, and every remote function it performs is noted before work starts, since there is nothing else to check against. The new key is built to match, then tested on its own, away from the original, to confirm it genuinely operates independently rather than only appearing to work while the first key happens to be nearby with its own signal still in range.

  3. 3

    Where the spare should live

    A spare that stays inside the vehicle solves little if the vehicle itself is what gets locked or lost, so the sensible places are a bag that travels separately, a drawer at home, or with a family member who is easy to reach. A passive proximity spare benefits from a signal-blocking pouch when it is stored, since that kind of fob keeps broadcasting even while it sits untouched in a drawer; a standard button-operated remote works differently and does not need the same pouch. Wherever it ends up, the location is worth sharing with at least one other person in the household so the spare is findable by someone other than the person who put it away.

In the van

  • Key blank matched to blade profile
  • Code-cutting machine
  • Coin-cell fob battery
  • Remote-head key shell
  • Transponder chip

What affects the quote

  1. 1

    Choosing a limited-function spare

    A simplified key built for a valet or a specific driver, without every remote feature the primary key carries, generally involves less programming than matching every function exactly.

  2. 2

    Whether remote functions are included

    A spare limited to the blade and chip that unlock and start the vehicle involves less programming than a full match of every remote button the original carries, and the quote follows whichever is chosen.

  3. 3

    Fob battery and physical condition

    A fob that needs a fresh battery or shows cracking or water exposure adds a small amount of extra work beyond programming a key that is otherwise in good shape.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 816-4986

Spare Car Key Duplication: questions

Advice · (289) 816-4986

Can spare keys be made for older vehicles without a chip?

Yes, and it is usually the most straightforward version of this service. A vehicle old enough to use a plain mechanical key has no chip to read or program, so the whole job is cutting a matching blade, either traced from the original or cut to code, and testing it in every lock the first key opens.

Can a spare be made if the vehicle has an aftermarket alarm or remote starter installed?

Generally yes, though it is worth mentioning any aftermarket system when you call, since a factory immobilizer that has been wired into a third-party alarm or remote starter sometimes behaves differently from the standard setup the locksmith expects. Knowing this in advance lets the visit account for it rather than discovering it partway through programming.

What is a relay attack, and does it matter for my spare?

A relay attack is when nearby equipment picks up a proximity fob's signal from inside a house and relays it to a vehicle parked outside, tricking the car into thinking the key is close enough to unlock or start. It matters for every fob in the household, spare included, which is why storing any proximity key in a signal-blocking pouch when it is not being carried is worth doing for all of them.

Halton, Ontario

Burlington information

Town
Burlington, Halton, Ontario
In business
16 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

47%

Homes of every age. About 47% of homes in Burlington were built in 1980 or earlier, according to the 2021 Census.

In neighbourhoods with a mix of older and newer homes, the finishes on the doors vary widely: aged brass, satin nickel, matte black. A locksmith serving such an area keeps a range of finishes so replacement hardware suits each house.

50%

A mix of homes. Single-detached houses make up about 50% of homes in Burlington (2021 Census).

Where housing is mixed, the same street can hold a solid wood front door, a steel townhouse door and a metal-clad suite door. A locksmith fits each with hardware suited to its construction, so every neighbour ends up with a door that locks properly.

Source: Statistics Canada, 2021 Census of Population

Open Burlington in Google Maps

Open 24/7

Request a visit

The paperwork for the used car changed hands last week, and the previous owner mentioned, almost as an afterthought, that a second key never turned up.

Call now · open 24/7(289) 816-4986
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 16 years in business