
1 / 9
The previous owners left a coffee tin of keys on the counter, some labelled, most not. The house is yours now, but you have no idea how many copies were cut over the years or who still has one in a drawer somewhere.

Safely, right now
Safely, right now
Safely, right now
Safely, right now
Cold mornings in Palmer are hard on tired brass, and a key that has been bending for years finally lets go inside the lock. We remove the snapped piece without harming the cylinder, look at why it failed, and cut a fresh key from the code or the remaining half before we leave.
Same fees day or night · 16 years in business
The fix, explained · Palmer
The fix
Being locked out is uncomfortable, but it is also the moment most households finally sort out their keys. Once the door is open, the same visit can rekey the locks so a lost key stops mattering, cut properly coded spares to replace worn copies, key the front and back doors alike so one key runs the house, or set up a small…
The fix
A locked business loses trading time, so the visit is arranged around getting people back to work. The locksmith opens the door first and settles the cause second: a snapped key is extracted and the cylinder checked, a lost key leads to rekeying while staff open up, a failed deadlatch spring is replaced before the door is…
The fix
The tools are simple and precise. A hook extractor is a thin strip of spring steel with a barb at the tip; it slides along the groove of the keyway above or below the fragment, snags one of the cuts, and walks it out.
The fix
A failed break-in is still a repair. When a lock holds against a pry bar or a kick, the force goes somewhere: a strike plate bends, screws loosen, the door edge takes a gouge, the deadbolt binds where the bolt met the strike under load.
Call (289) 816-4986Request a visit Break-In Damage Lock Repair
The fix
Most seized locks can be saved, and keeping your existing hardware is the aim. A cylinder that has stopped turning is usually recoverable with cleaning and fresh internal parts.
Call (289) 816-4986Request a visit Seized & Jammed Lock Opening
The fix
A missing key is also the moment a household can stop carrying four. Because a rekey sets a fresh combination in every cylinder anyway, the locksmith can set the same combination in all of them, provided they share a keyway family, so the front door, back door, garage entry and side gate open with one key.
Call (289) 816-4986Request a visit Lost Keys — Same-Visit Rekey

A safe in Palmer is opened with patience rather than force. The locksmith identifies the make and mechanism, tries the non-destructive routes first, and only cuts when nothing else will work, in a spot that can be repaired so the safe keeps working. Afterwards he resets the combination or replaces the lock and shows you how to keep it turning.
Burlington, Brant Hills, Clarksdale, Freeman, Glenwood Park, Highview Survey, Mountain Gardens and Tyandaga
Plain words. We talk about pins, cylinders and strikes only when it helps you understand. Otherwise it is 'this is why the door sticks and here is what fixes it'.
Respect for your door. We treat an old wooden door or a new steel one as yours, not as a project. Non-destructive methods come first, and we ask before drilling anything.
Knowing what you are left with. Before we leave, you will know exactly what changed, how many keys exist and what to keep an eye on. Nothing is left as a mystery.
Ask about a spare key before you need one: (289) 816-4986
Palmer
The lock services below are the ones people in Palmer ask for by name: get me back in, change the locks, rekey the house, put a deadbolt on this door, sort out the shop, open the safe. Each page answers the questions that usually come next, and the technician answers the rest at the door.
Bigger photo, sooner job: Emergency Book soon Plan ahead
Lock Rekeying
Lock Replacement & Upgrade
Smart Lock Installation
Mailbox Lock Replacement
Safe Opening & Combination Change
Plan aheadMaster Key System Design
EmergencyCar Lockout ServiceIt is a January morning, minus twenty with the wind, and the key will not enter the door cylinder.
Ignition Lock RepairSound familiar?

1 / 9
The previous owners left a coffee tin of keys on the counter, some labelled, most not. The house is yours now, but you have no idea how many copies were cut over the years or who still has one in a drawer somewhere.

2 / 9
Three teenagers, a dog walker, a cleaner and one house key that keeps going missing. You are tired of cutting copies and would rather give each person a code you can switch off, with a proper deadbolt behind it.

3 / 9
There are four copies of the front-door key floating around: one with the cleaner, one with a neighbour, one on a hook at your parents' place, and one you honestly cannot account for. You would rather hand out codes you can switch off.

4 / 9
The mail slot on the shop's exterior wall has a small compartment lock that a former employee still has a key to, months after they left. Nobody on staff can say with any confidence who else might hold a copy.

5 / 9
The bookkeeper who set the office safe's code retired in a hurry, and the float cash for tomorrow's registers is sitting behind a keypad nobody else in the building can operate.

6 / 9
A colleague showed you a video of a lock being opened with a bump key in a few seconds. Then you went home and noticed your own deadbolt is the same style, bought at a hardware store a decade ago.

7 / 9
On the warehouse floor, a shift supervisor's key opens the loading dock, the tool crib and the manager's office, though only the dock is really part of the job. Nobody planned it that way; the key was simply copied from whichever one was closest at hand.

8 / 9
The trunk is full of groceries, the cart is back in its corral, and the keys are sitting in the cup holder in plain view. Every door handle lifts and stops. The car locked itself the moment the last door closed, and it is a warm afternoon.

9 / 9
After a slushy week the key barely reaches accessory before it stalls, gritty and reluctant, where it used to move cleanly through every position. Warming the car up in the driveway hasn't changed how the barrel feels at all.
Halton, Ontario
High Security Locks, Car Lockout Service, Lock Rekeying, Ignition Lock Repair, Lock Replacement & Upgrade, Smart Lock Installation, Safe Opening & Combination Change, Mailbox Lock Replacement and Master Key System Design
47%
Homes of every age. About 47% of homes in Burlington were built in 1980 or earlier, according to the 2021 Census.
Where housing is mixed, doors that have been replaced sit beside doors that never were. A new door in an old frame, or an old door in a repaired frame, needs its strike and hinges checked together so the whole assembly works as one.
50%
A mix of homes. Single-detached houses make up about 50% of homes in Burlington (2021 Census).
In a mixed area, a locksmith's advice bends to the building. For a house, the side door and garage entry get attention. For an apartment, the suite door's closer, strike and viewer do. The principle is the same: look at how the door is actually used.
It is the single most common reason to rekey, and a sensible one. A resale home has typically passed through owners, agents, inspectors, cleaners and trades, any of whom may have had a key cut. A newly built home has been opened by construction crews using a builder's key. Rekeying on move-in means the only working keys are yours, and the same visit can bring every exterior door onto a single key, retiring the assorted keys you inherited.
A standard strike is a thin plate held by two short screws in the jamb, and the jamb is what splits when a door is forced. A reinforced strike or strike box is heavier and is fixed with long screws that pass through the jamb into the framing, spreading the load into the structure. It is one of the most effective upgrades on any exterior door and is usually fitted as part of a deadbolt replacement.
Smart locks come in the same finish families as ordinary hardware: satin nickel, matte black, aged bronze, polished brass and chrome. The locksmith matches the finish to your handle set, or swaps the handle at the same time so the door reads as one piece. Where an old finish has weathered to a shade no new part will match, replacing the knob or lever alongside the deadbolt is the tidy answer, and the two are often sold as a matching pair.
Thousands of turns over the years wear down the small parts inside a cam lock the same way any cylinder wears, and a worn key accelerates it further. A cylinder that spins without engaging the cam usually means the connection between the two has failed, often from corrosion or metal fatigue rather than anything the resident did. Once that connection goes, replacement is simpler than trying to repair the worn parts individually.
Open 24/7
Ask about rekeying your Palmer business
Call now · open 24/7(289) 816-4986Menu
What is the door doing?
Services