Skip to content
Clarksdale Locksmith SpecialistsRequest a visit
Open 24/7(289) 816-4986Call now
Two black-headed keys clamped in a bench machine, one beneath a vertical cutter, with metal shavings around the clamps. — Spare Car Key Duplication, Burlington

Car keys · Burlington

Spare Car Key Duplication

The paperwork for the used car changed hands last week, and the previous owner mentioned, almost as an afterthought, that a second key never turned up. One worn blade on a single ring is now the entire access system for the vehicle.

Call now · open 24/7(289) 816-4986

Request a visit

In plain words

Spare car key duplication puts a second working key into your hand while the first is still around to copy from. The locksmith checks that you are entitled to the vehicle, reads the blade the existing key was cut to, and gives the new blank the same electronic identity the original carries, whether that means cloning a compatible transponder chip or enrolling a fresh chip through the car's diagnostic port. Before the visit ends, the new key is proven in every door, the trunk and the ignition or start button, so you leave with two keys known to work, not one tested key and one hopeful copy.

Sound familiar?

The paperwork for the used car changed hands last week, and the previous owner mentioned, almost as an afterthought, that a second key never turned up. One worn blade on a single ring is now the entire access system for the vehicle.

How the visit goes

Spare Car Key Duplication · Burlington

How the visit goes

Technician with a yellow cordless drill and thin screwdriver bit fastening a brass-colored lock plate on a dark paneled front door.
  1. 1

    Checking how many keys already exist

    A vehicle can be sitting on more than the one key its owner mentions, and an honest account of every key, valet key and remote in circulation shapes what happens next. If two or three already exist and work, a new spare simply joins that set. If a key was lost some time ago and never accounted for, that shifts the conversation toward reprogramming the whole system to drop the missing one, rather than quietly adding a fourth key to a set that already has an unknown copy loose somewhere. Either way, knowing the real count is worth establishing before cutting begins.

  2. 2

    Giving the new key its electronic identity

    A cut blade alone will turn the lock but will not start a car with an immobilizer, so the new key also needs the chip data the vehicle expects. Where the transponder supports it, the original's data is read and cloned onto a fresh chip directly, sometimes with the help of vehicle-specific data pulled from the car itself. Where cloning is not supported for that application, the locksmith instead connects to the vehicle's diagnostic port and walks the car's own security module through enrolling the new chip as an additional valid key, a process that can take longer but produces a key the vehicle recognizes on its own rather than one imitating another.

  3. 3

    A record worth keeping

    A short note of how many keys exist for the vehicle, what each one can do, and who holds it is a small thing to write down and a genuinely useful one to have later, whether that later is a private sale, an insurance question, or simply working out which key someone borrowed and forgot to return. This record also makes any future visit faster to start, since a returning locksmith or a different one entirely can begin from a known baseline instead of counting keys from scratch.

In the van

  • Key blank matched to blade profile
  • Code-cutting machine
  • Coin-cell fob battery
  • Remote-head key shell
  • Transponder chip

What affects the quote

  1. 1

    Fob battery and physical condition

    A fob that needs a fresh battery or shows cracking or water exposure adds a small amount of extra work beyond programming a key that is otherwise in good shape.

  2. 2

    Manufacturer-specific security systems

    Certain manufacturers build key systems that call for specialized equipment or additional authorization steps, which can mean more time at the vehicle than a more widely supported system.

  3. 3

    Condition of the working key

    A clean, unworn original traces onto a blank without much fuss, while a thinned or damaged blade may need cutting to a factory code instead, which is a different process with its own materials.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 816-4986

Spare Car Key Duplication: questions

Advice · (289) 816-4986

Can spare keys be made for older vehicles without a chip?

Yes, and it is usually the most straightforward version of this service. A vehicle old enough to use a plain mechanical key has no chip to read or program, so the whole job is cutting a matching blade, either traced from the original or cut to code, and testing it in every lock the first key opens.

Can a spare be made if the vehicle has an aftermarket alarm or remote starter installed?

Generally yes, though it is worth mentioning any aftermarket system when you call, since a factory immobilizer that has been wired into a third-party alarm or remote starter sometimes behaves differently from the standard setup the locksmith expects. Knowing this in advance lets the visit account for it rather than discovering it partway through programming.

What is a relay attack, and does it matter for my spare?

A relay attack is when nearby equipment picks up a proximity fob's signal from inside a house and relays it to a vehicle parked outside, tricking the car into thinking the key is close enough to unlock or start. It matters for every fob in the household, spare included, which is why storing any proximity key in a signal-blocking pouch when it is not being carried is worth doing for all of them.

Halton, Ontario

Burlington information

Town
Burlington, Halton, Ontario
In business
16 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

47%

Homes of every age. About 47% of homes in Burlington were built in 1980 or earlier, according to the 2021 Census.

In neighbourhoods with a mix of older and newer homes, the finishes on the doors vary widely: aged brass, satin nickel, matte black. A locksmith serving such an area keeps a range of finishes so replacement hardware suits each house.

50%

A mix of homes. Single-detached houses make up about 50% of homes in Burlington (2021 Census).

Where housing is mixed, the same street can hold a solid wood front door, a steel townhouse door and a metal-clad suite door. A locksmith fits each with hardware suited to its construction, so every neighbour ends up with a door that locks properly.

Source: Statistics Canada, 2021 Census of Population

Open Burlington in Google Maps

Open 24/7

Request a visit

The paperwork for the used car changed hands last week, and the previous owner mentioned, almost as an afterthought, that a second key never turned up.

Call now · open 24/7(289) 816-4986
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 16 years in business