Skip to content
Clarksdale Locksmith SpecialistsRequest a visit
Open 24/7(289) 816-4986Call now
Detached satin-nickel lever hardware, tubular latch and strike plate on a wooden workbench. — Lock Replacement & Upgrade, Palmer

Change or rekey · Palmer

Lock Replacement & Upgrade in Palmer

The house is fifteen years old and every exterior door still wears the light hardware the builder fitted: a short bolt, a thin strike held by two small screws, and a knob lock that never suited a street entrance.

Call now · open 24/7(289) 816-4986

Request a visit

In plain words

Lock replacement and upgrade is the service that takes tired or under-built door hardware off and puts hardware suited to the door in its place. It ranges from a like-for-like deadbolt on a back door to a complete refit of every entrance with heavier-grade locks, reinforced strikes and one key for the house. The locksmith first confirms that the person ordering the work has the right to change the lock, then examines the door, measures the existing preparation and recommends hardware that fits it cleanly. The visit ends with each lock tested from both sides, keys in your hand and the packaging and instructions left with you.

Sound familiar?

Every morning the front door key needs the same little dance: push in, lift, wiggle, turn. It has been getting worse for a year, and this week it took three tries in the cold before the deadbolt finally gave.

How the visit goes

Lock Replacement & Upgrade · Palmer

How the visit goes

Technician with a yellow cordless drill and thin screwdriver bit fastening a brass-colored lock plate on a dark paneled front door. — Palmer
  1. 1

    Exposure, weather and finish

    The locksmith looks at where the door lives. A side entrance beside a salted driveway, a south-facing front door in full sun and a sheltered porch each treat a finish differently, and the residential hardware label scores finish durability as its own category for exactly this reason. Existing hardware is examined for pitting, peeling and green bloom, which shows how hard the spot is on metal. That guides the choice between a PVD brass, a satin nickel, a powder-coated black or a stainless product, and whether a storm door or a small hood would help. Matching the rest of the entrance comes last, once the finish will survive the location.

  2. 2

    Keying the new locks to one key

    New cylinders arrive on random keys, so the locksmith pins them alike on site when you want one key for the house. Each cylinder is removed, the plug slid out on a follower so the springs stay put, and the bottom pins replaced to match a single new key. Existing cylinders that are staying are repinned the same way. Every key is then cut from the new combination, tried in every lock it should open, and any that drag are recut rather than handed over. The result is one key for the front, back and garage doors, and a clear count of how many exist.

  3. 3

    A record of what went on the door

    You are told plainly what was fitted: the maker and model, the grade, the function and finish of each lock, whether the strike was reinforced, and how the doors are keyed. The instruction sheets and packaging stay with you, since they carry the model numbers needed for a matching lever or a spare cylinder later. The old hardware is handed over or taken away as you prefer; a sound old cylinder can be worth keeping as a spare. For a rental, this account doubles as the note a landlord or property manager will want about the new keys.

In the van

  • Knob or lever entry set
  • Key blanks and key cutter
  • Filler plates and thick-door extension kits
  • Cylinders, plug follower and pinning kit
  • Adjustable latch or bolt

What affects the quote

  1. 1

    Special-order hardware

    Most standard locks come from the van. A specific style, an unusual finish or a restricted system may need ordering, which affects scheduling and is noted in the quote rather than discovered on the day.

  2. 2

    Condition of the old hardware

    Hardware that comes off cleanly is one thing; painted-over trim, seized or stripped screws and a cylinder that has to be drilled out add time before the new lock can go on.

  3. 3

    Restricted keyway system

    Patented cylinders and controlled key blanks cost more than standard hardware and involve setting up your key records, which is quoted separately from an ordinary replacement.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 816-4986

Lock Replacement & Upgrade: questions

Advice · (289) 816-4986

I have just bought a house. What should I do about the locks?

Assume that copies of the old keys exist somewhere and act on the day you take possession. Walk every exterior door with the locksmith, keep hardware that is sound and have it rekeyed to a new key, replace hardware that is worn or too light, and add a deadbolt to any door that lacks one. Ask for everything to be keyed alike so you leave with one key and a known number of copies.

What is a reinforced strike, and is it worth adding?

A standard strike is a thin plate held by two short screws in the jamb, and the jamb is what splits when a door is forced. A reinforced strike or strike box is heavier and is fixed with long screws that pass through the jamb into the framing, spreading the load into the structure. It is one of the most effective upgrades on any exterior door and is usually fitted as part of a deadbolt replacement.

How long does a lock replacement take?

A straightforward like-for-like deadbolt or knob set on a standard door is often a matter of an hour or less including testing. Add time for a reinforced strike, for keying several locks alike and cutting keys, for a smart lock's setup and pairing, and for repairing a split jamb or adapting an older door. When several entrances are done together, the locksmith gives a realistic window before starting so you can plan the day.

Halton, Ontario

Palmer information

Town
Palmer, Halton, Ontario
In business
16 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

47%

Homes of every age. About 47% of homes in Burlington were built in 1980 or earlier, according to the 2021 Census.

Where housing is mixed, doors that have been replaced sit beside doors that never were. A new door in an old frame, or an old door in a repaired frame, needs its strike and hinges checked together so the whole assembly works as one.

50%

A mix of homes. Single-detached houses make up about 50% of homes in Burlington (2021 Census).

In a mixed area, a locksmith's advice bends to the building. For a house, the side door and garage entry get attention. For an apartment, the suite door's closer, strike and viewer do. The principle is the same: look at how the door is actually used.

Source: Statistics Canada, 2021 Census of Population

Open Palmer in Google Maps

Open 24/7

Request a visit

The house is fifteen years old and every exterior door still wears the light hardware the builder fitted: a short bolt, a thin strike held by two small screws, and a knob lock that never suited a…

Call now · open 24/7(289) 816-4986
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 16 years in business